15-01-2015, 10:41 AM
It the motor geared or belt drive?
Many are part belt and part geared.
On VCRs the motor has a belt linking the loading motor to the geared section and it stretches and slips and causes loading failure.
You need to gain visible access to the loading motor and see where the drive is slipping and help it by hand.
If this results in success change the drive belt.
An "O" ring will often do the job.
Many are part belt and part geared.
On VCRs the motor has a belt linking the loading motor to the geared section and it stretches and slips and causes loading failure.
You need to gain visible access to the loading motor and see where the drive is slipping and help it by hand.
If this results in success change the drive belt.
An "O" ring will often do the job.
