rewiring Avo two panel tester

[AlanBeckett]

Back on the Job at last.
Stripped and Tinned one end of the Cable.
Poked them in to the Pins - not a job I'd want to do every day.
Soldered the ends.
Snipped the Wires off and smoothed up.
Dripped some Wax into the Body to provide some Strain Relief.
Fitted the Nylon Plug - had to shorten it a tad.
Araldited the Plug in.
Tested it - seems OK.

So, now all I need to do is take the Tester to bits again and persuade Rob to tell me where to put the Wires

Alan