rewiring Avo two panel tester

[Bushbaby]

I've wired using a variety of cables to stick to the orginal colours as much as possibel although I was overly fussed about originality. I did look at using the heavier duty cable for all of the connections but this quickly became a non starter as a) it was too big in diameter to fit the tag connectors and b) it became far to cumbersome to solder to the ends of the connectors of the rotary switches. I've used 24 0.2 cables on all but the heaters (H+ and H-) and cathode where I have used heavy duty tow connector cable (otherwise they would touch).

Regards

Rob
Rob