26-08-2014, 12:20 PM
Perhaps replacing all 3 existing chokes with one that is approx. 2H may be the solution. A typical 2H choke will have a resistance of about 75 Ω and its size will be usually in the range 3" x 2½" x 2½" to 4" x 3" x 3".
With regard to 'size of the base', I had a similar problem some time ago with a lamp. I simply replaced the base box with a larger one. As it was for workshop use, the 'cosmetic factor' was not relevant.
Al.
With regard to 'size of the base', I had a similar problem some time ago with a lamp. I simply replaced the base box with a larger one. As it was for workshop use, the 'cosmetic factor' was not relevant.
Al.
