Wilmac bandsaw restoration MKII

0 Vote(s) - 0 Average
1
2
3
4
5

Wilmac bandsaw restoration MKII

AlanBeckett

Rest in Peace

Posts: 3,528
Location: Burton on Trent

#24

15-05-2014, 02:59 PM

If you buy a piece of (20mm) Silver Steel it will be ground to 20mm.
The ID of Bearings is very accurate as well.
Have a look on here - http://simplybearings.co.uk/shop/ - bottom left.

Alan

Quote

Messages In This Thread

Wilmac bandsaw restoration MKII - by robert the violinist - 04-05-2014, 11:26 AM

RE: Wilmac bandsaw restoration MKII - by AlanBeckett - 04-05-2014, 01:07 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 04-05-2014, 02:18 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 06-05-2014, 09:47 AM

RE: Wilmac bandsaw restoration MKII - by Retired - 04-05-2014, 01:26 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 04-05-2014, 02:21 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 04-05-2014, 04:18 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 04-05-2014, 05:52 PM

RE: Wilmac bandsaw restoration MKII - by AlanBeckett - 04-05-2014, 06:24 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 04-05-2014, 08:15 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 05-05-2014, 01:19 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 05-05-2014, 02:10 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 06-05-2014, 08:00 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 06-05-2014, 09:41 AM

RE: Wilmac bandsaw restoration MKII - by Retired - 07-05-2014, 08:11 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 07-05-2014, 10:45 PM

RE: Wilmac bandsaw restoration MKII - by AlanBeckett - 08-05-2014, 07:19 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 08-05-2014, 06:29 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 08-05-2014, 10:22 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 08-05-2014, 06:42 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 09-05-2014, 09:19 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 09-05-2014, 07:33 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 15-05-2014, 01:56 PM

RE: Wilmac bandsaw restoration MKII - by AlanBeckett - 15-05-2014, 02:59 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 15-05-2014, 03:43 PM

RE: Wilmac bandsaw restoration MKII - by AlanBeckett - 15-05-2014, 04:48 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 15-05-2014, 04:50 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 15-05-2014, 06:15 PM

RE: Wilmac bandsaw restoration MKII - by Retired - 15-05-2014, 07:48 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 16-05-2014, 10:02 AM

RE: Wilmac bandsaw restoration MKII - by Alan Douglas - 15-05-2014, 08:30 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 16-05-2014, 09:40 AM

RE: Wilmac bandsaw restoration MKII - by Retired - 16-05-2014, 11:25 AM

RE: Wilmac bandsaw restoration MKII - by Alan Douglas - 16-05-2014, 05:09 PM

RE: Wilmac bandsaw restoration MKII - by Alan Douglas - 19-05-2014, 01:33 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 21-05-2014, 06:44 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 14-03-2015, 04:14 PM

RE: Wilmac bandsaw restoration MKII - by Refugee - 14-03-2015, 04:36 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 14-03-2015, 04:53 PM

RE: Wilmac bandsaw restoration MKII - by Refugee - 14-03-2015, 05:05 PM

RE: Wilmac bandsaw restoration MKII - by Yorkie - 14-03-2015, 07:43 PM

RE: Wilmac bandsaw restoration MKII - by Yorkie - 14-03-2015, 07:46 PM

RE: Wilmac bandsaw restoration MKII - by Mark Hennessy - 15-03-2015, 12:35 AM

RE: Wilmac bandsaw restoration MKII - by Refugee - 15-03-2015, 12:49 AM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 15-03-2015, 10:47 AM

RE: Wilmac bandsaw restoration MKII - by Mark Hennessy - 15-03-2015, 02:58 PM

RE: Wilmac bandsaw restoration MKII - by Alan Douglas - 15-03-2015, 11:08 AM

RE: Wilmac bandsaw restoration MKII - by Refugee - 15-03-2015, 11:14 AM

RE: Wilmac bandsaw restoration MKII - by Radio Fixer - 15-03-2015, 12:13 PM

RE: Wilmac bandsaw restoration MKII - by Alan Douglas - 15-03-2015, 01:37 PM

RE: Wilmac bandsaw restoration MKII - by robert the violinist - 15-03-2015, 07:42 PM

RE: Wilmac bandsaw restoration MKII - by Mark Hennessy - 15-03-2015, 08:36 PM

RE: Wilmac bandsaw restoration MKII - by Refugee - 16-03-2015, 12:09 AM

Users browsing this thread:

1 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me