07-05-2014, 10:45 PM
(This post was last modified: 07-05-2014, 10:50 PM by robert the violinist.)
Hi Col, im very careful when messing with electrics . Pictures of the motor plate and whats under the access cover are attached. There are 6 wires there i think but not certain.
I tried putting the door in very strong caustic bath but the paint wasnt affected so i assume its some sort of baked enamel . So i guess not having access to any sort of soda blaster i`ll have to make up my own paint stripper from the array of solvents i have in the cupboard.
What do you think about the motor? There a piece of paper attached to it but dont know what to make of that either as some bits are worn off.
Thanks Bob
I tried putting the door in very strong caustic bath but the paint wasnt affected so i assume its some sort of baked enamel . So i guess not having access to any sort of soda blaster i`ll have to make up my own paint stripper from the array of solvents i have in the cupboard.
What do you think about the motor? There a piece of paper attached to it but dont know what to make of that either as some bits are worn off.
Thanks Bob
