'Connections' that aren't 
Here's an example.
Recently, I overhauled a Racal RA-17L. As is usual with these receivers, the 2nd. VFO assembly needed an extensive overhaul - and that is mainly because of the heat generated in its tightly-sealed box - there is insufficient ventilation in that box for the heat to escape. Upon opening it up, it was obvious that someone had been there before - and had not made a very good job of an 'overhaul'.
See if you can spot the 'deliberate mistake' in this photo.:
[attachment=10615]
Al. / April 20.
Here's an example. Recently, I overhauled a Racal RA-17L. As is usual with these receivers, the 2nd. VFO assembly needed an extensive overhaul - and that is mainly because of the heat generated in its tightly-sealed box - there is insufficient ventilation in that box for the heat to escape. Upon opening it up, it was obvious that someone had been there before - and had not made a very good job of an 'overhaul'.
See if you can spot the 'deliberate mistake' in this photo.:
[attachment=10615]
Al. / April 20.
