16-02-2014, 06:46 PM
Well the transformer winder is an almost complete ice cream maker conversion with a turns counter and an electronic auto stop on a preset count.
It unlike commercial units has a vertical chuck. The upper bearing is yet to be finished as are is the bobbin mounting parts. The counter works and does generate the stop signal as does the bobbin drive from below the deck.
The photo of the transformer coil and lams was taken on the deck of the winder with the feed bobbins visible.
The first job after what is on the bench now is a scope that needs the PDA rewound so it is looking good to get the winder finished off soon.
I will do a proper thread for the winder as I have all the photos including doing the counter and auto stop parts.
It unlike commercial units has a vertical chuck. The upper bearing is yet to be finished as are is the bobbin mounting parts. The counter works and does generate the stop signal as does the bobbin drive from below the deck.
The photo of the transformer coil and lams was taken on the deck of the winder with the feed bobbins visible.
The first job after what is on the bench now is a scope that needs the PDA rewound so it is looking good to get the winder finished off soon.
I will do a proper thread for the winder as I have all the photos including doing the counter and auto stop parts.
