20-04-2011, 02:59 PM
As my Pye is in imminent danger of meeting Mr Hammer I got on with this today.
I've now done as much as I can until I can get another couple of resistors which I didn't get before as I was working off the (wrong) circuit diagram.
One is connected between pins 1 and 9 of the UCL83. It's got a hole in it and measures at 348K but appears to be marked for 2.7M. The last band is a bit faded but I'm sure it is green but would just like to ask my learned brethern if this seems like a reasonable value.
As I said in the Pye thread, how on earth did PCBs catch on?
- Joe
I've now done as much as I can until I can get another couple of resistors which I didn't get before as I was working off the (wrong) circuit diagram.
One is connected between pins 1 and 9 of the UCL83. It's got a hole in it and measures at 348K but appears to be marked for 2.7M. The last band is a bit faded but I'm sure it is green but would just like to ask my learned brethern if this seems like a reasonable value.
As I said in the Pye thread, how on earth did PCBs catch on?
- Joe
