Wilmac bandsaw restoration.

0 Vote(s) - 0 Average
1
2
3
4
5

Wilmac bandsaw restoration.

Radio Fixer

Senior Engineer in Charge

Posts: 2,513
Reputation: 7
Location: Southend

#148

11-02-2014, 08:03 AM (This post was last modified: 11-02-2014, 08:04 AM by Radio Fixer.)

From that site is a pic of a restored one: http://www.lathes.co.uk/lorchrestoration/

There's an awful lot of knobs and levers to twiddle: a real learning curve !

Gary

Quote

Messages In This Thread

Wilmac bandsaw restoration. - by Retired - 03-12-2013, 04:35 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 03-12-2013, 06:12 PM

RE: Wilmac bandsaw restoration. - by Refugee - 03-12-2013, 06:14 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 03-12-2013, 06:30 PM

RE: Wilmac bandsaw restoration. - by Retired - 03-12-2013, 08:16 PM

RE: Wilmac bandsaw restoration. - by Retired - 05-12-2013, 07:58 PM

RE: Wilmac bandsaw restoration. - by Refugee - 05-12-2013, 10:22 PM

RE: Wilmac bandsaw restoration. - by Retired - 06-12-2013, 09:05 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 06-12-2013, 09:31 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 06-12-2013, 10:18 AM

RE: Wilmac bandsaw restoration. - by Retired - 06-12-2013, 05:15 PM

RE: Wilmac bandsaw restoration. - by Yorkie - 06-12-2013, 05:31 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 06-12-2013, 05:48 PM

RE: Wilmac bandsaw restoration. - by Retired - 06-12-2013, 07:03 PM

RE: Wilmac bandsaw restoration. - by ex 2 Base - 07-12-2013, 11:32 AM

RE: Wilmac bandsaw restoration. - by Retired - 07-12-2013, 02:15 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 07-12-2013, 02:20 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 07-12-2013, 02:33 PM

RE: Wilmac bandsaw restoration. - by Retired - 07-12-2013, 05:05 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 07-12-2013, 05:27 PM

RE: Wilmac bandsaw restoration. - by Retired - 15-12-2013, 04:59 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 15-12-2013, 05:31 PM

RE: Wilmac bandsaw restoration. - by Refugee - 15-12-2013, 06:07 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 16-12-2013, 08:53 AM

RE: Wilmac bandsaw restoration. - by camallison - 16-12-2013, 09:06 AM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 16-12-2013, 10:22 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 16-12-2013, 10:26 AM

RE: Wilmac bandsaw restoration. - by Retired - 16-12-2013, 12:25 PM

RE: Wilmac bandsaw restoration. - by Retired - 18-12-2013, 12:02 PM

RE: Wilmac bandsaw restoration. - by Joe - 18-12-2013, 12:49 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 18-12-2013, 01:06 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 18-12-2013, 03:47 PM

RE: Wilmac bandsaw restoration. - by Retired - 18-12-2013, 04:12 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 18-12-2013, 05:50 PM

RE: Wilmac bandsaw restoration. - by Retired - 19-12-2013, 09:09 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 19-12-2013, 11:15 AM

RE: Wilmac bandsaw restoration. - by Retired - 19-12-2013, 11:58 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 19-12-2013, 04:34 PM

RE: Wilmac bandsaw restoration. - by Yorkie - 19-12-2013, 05:18 PM

RE: Wilmac bandsaw restoration. - by Retired - 19-12-2013, 08:07 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 20-12-2013, 08:19 AM

RE: Wilmac bandsaw restoration. - by camallison - 20-12-2013, 09:18 AM

RE: Wilmac bandsaw restoration. - by Retired - 20-12-2013, 12:03 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 20-12-2013, 05:42 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 20-12-2013, 06:07 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 22-12-2013, 06:07 PM

RE: Wilmac bandsaw restoration. - by Retired - 20-12-2013, 07:45 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 21-12-2013, 08:49 AM

RE: Wilmac bandsaw restoration. - by Retired - 21-12-2013, 10:23 AM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 21-12-2013, 10:56 AM

RE: Wilmac bandsaw restoration. - by Retired - 21-12-2013, 11:37 AM

RE: Wilmac bandsaw restoration. - by Refugee - 21-12-2013, 11:45 AM

RE: Wilmac bandsaw restoration. - by Retired - 21-12-2013, 05:00 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 21-12-2013, 05:28 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 21-12-2013, 05:42 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 21-12-2013, 06:11 PM

RE: Wilmac bandsaw restoration. - by Retired - 22-12-2013, 11:33 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 22-12-2013, 12:26 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 22-12-2013, 12:40 PM

RE: Wilmac bandsaw restoration. - by Retired - 22-12-2013, 03:35 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 22-12-2013, 03:57 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 22-12-2013, 05:50 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 22-12-2013, 05:53 PM

RE: Wilmac bandsaw restoration. - by Retired - 22-12-2013, 07:16 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 22-12-2013, 08:54 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 23-12-2013, 07:40 AM

RE: Wilmac bandsaw restoration. - by Retired - 23-12-2013, 08:02 AM

RE: Wilmac bandsaw restoration. - by Yorkie - 23-12-2013, 08:51 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 23-12-2013, 09:35 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 23-12-2013, 09:37 AM

RE: Wilmac bandsaw restoration. - by Retired - 23-12-2013, 01:05 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 23-12-2013, 03:00 PM

RE: Wilmac bandsaw restoration. - by Keithstv - 23-12-2013, 03:22 PM

RE: Wilmac bandsaw restoration. - by Retired - 23-12-2013, 04:09 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 03:40 AM

RE: Wilmac bandsaw restoration. - by Retired - 24-12-2013, 08:58 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 09:28 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 10:41 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 11:27 AM

RE: Wilmac bandsaw restoration. - by Joe - 24-12-2013, 11:56 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 12:03 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 12:18 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 01:01 PM

RE: Wilmac bandsaw restoration. - by Refugee - 24-12-2013, 01:08 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 01:28 PM

RE: Wilmac bandsaw restoration. - by Joe - 24-12-2013, 02:59 PM

RE: Wilmac bandsaw restoration. - by Retired - 24-12-2013, 04:32 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 05:08 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 06:23 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-12-2013, 12:29 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 25-12-2013, 02:13 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 25-12-2013, 03:03 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-12-2013, 07:29 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 25-12-2013, 07:40 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-12-2013, 08:21 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 25-12-2013, 08:29 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-12-2013, 08:47 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 25-12-2013, 09:45 PM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 01:07 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 09:21 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 26-12-2013, 08:48 AM

RE: Wilmac bandsaw restoration. - by Retired - 26-12-2013, 10:35 AM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 11:14 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 11:21 AM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 26-12-2013, 11:54 AM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 01:14 PM

RE: Wilmac bandsaw restoration. - by Joe - 26-12-2013, 01:57 PM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 03:08 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 26-12-2013, 05:26 PM

RE: Wilmac bandsaw restoration. - by Retired - 26-12-2013, 05:50 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 05:59 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 06:10 PM

RE: Wilmac bandsaw restoration. - by Joe - 26-12-2013, 06:58 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 07:31 PM

RE: Wilmac bandsaw restoration. - by Retired - 26-12-2013, 09:19 PM

RE: Wilmac bandsaw restoration. - by Refugee - 27-12-2013, 12:50 AM

RE: Wilmac bandsaw restoration. - by Retired - 27-12-2013, 09:31 AM

RE: Wilmac bandsaw restoration. - by Retired - 03-01-2014, 11:37 AM

RE: Wilmac bandsaw restoration. - by Retired - 09-01-2014, 10:06 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 09-01-2014, 04:28 PM

RE: Wilmac bandsaw restoration. - by Retired - 09-01-2014, 07:55 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 09-01-2014, 10:27 PM

RE: Wilmac bandsaw restoration. - by Refugee - 10-01-2014, 12:18 AM

RE: Wilmac bandsaw restoration. - by Retired - 12-01-2014, 11:23 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 12-01-2014, 06:24 PM

RE: Wilmac bandsaw restoration. - by Retired - 13-01-2014, 04:16 PM

RE: Wilmac bandsaw restoration. - by Retired - 14-01-2014, 07:56 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 15-01-2014, 05:40 PM

RE: Wilmac bandsaw restoration. - by Retired - 15-01-2014, 07:57 PM

RE: Wilmac bandsaw restoration. - by Retired - 21-01-2014, 05:10 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-01-2014, 12:35 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-01-2014, 02:49 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-01-2014, 03:28 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-01-2014, 03:43 PM

RE: Wilmac bandsaw restoration. - by Retired - 01-02-2014, 12:28 PM

RE: Wilmac bandsaw restoration. - by camallison - 01-02-2014, 12:42 PM

RE: Wilmac bandsaw restoration. - by Retired - 01-02-2014, 02:05 PM

RE: Wilmac bandsaw restoration. - by camallison - 01-02-2014, 02:19 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 01-02-2014, 05:36 PM

RE: Wilmac bandsaw restoration. - by Retired - 01-02-2014, 09:59 PM

RE: Wilmac bandsaw restoration. - by Retired - 03-02-2014, 05:39 PM

RE: Wilmac bandsaw restoration. - by Retired - 10-02-2014, 05:39 PM

RE: Wilmac bandsaw restoration. - by camallison - 10-02-2014, 06:02 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 10-02-2014, 06:08 PM

RE: Wilmac bandsaw restoration. - by Retired - 10-02-2014, 07:38 PM

RE: Wilmac bandsaw restoration. - by camallison - 10-02-2014, 08:20 PM

RE: Wilmac bandsaw restoration. - by camallison - 10-02-2014, 08:22 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 11-02-2014, 08:03 AM

RE: Wilmac bandsaw restoration. - by Retired - 11-02-2014, 10:14 AM

RE: Wilmac bandsaw restoration. - by camallison - 11-02-2014, 10:37 AM

RE: Wilmac bandsaw restoration. - by Retired - 11-02-2014, 11:38 AM

Users browsing this thread:

1 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me