27-01-2014, 12:12 PM
thanks steve
but if you look at the schematic the tubes are connected in series and requires 70 volts
and i'm afraid that such a voltage might burn one of the tubes..and by the way ..i used 100 ohm,200 ohms and even 1k ohms all 10 watts but the voltage reading is still 150 dc
but if you look at the schematic the tubes are connected in series and requires 70 volts
and i'm afraid that such a voltage might burn one of the tubes..and by the way ..i used 100 ohm,200 ohms and even 1k ohms all 10 watts but the voltage reading is still 150 dc
