08-12-2013, 06:45 PM
Curiouser and Curiouser.
I checked R4 and found it was 1944Ω. As it would cost little in either money or effort I changed it.
LW still didn't work and neither did MW.
I had a look in case I'd shorted something and saw a bit of thin wire laying on the base of L6/7/8. I tried pulling it out but it seemed stuck and I then saw that it was vanishing between the base and aluminium casing.
I took this off, after noting the connections, and found it was actually three strands of thin wire going into the can but connected to nothing. The wires going from the tags to the coils all appear to be in order.
I'm calling it a day for now as I've got back ache and will be able to see better with fresh eyes tomorrow but hopefully this is the fault found.
Thanks for the much appreciated assistance.
- Joe
I checked R4 and found it was 1944Ω. As it would cost little in either money or effort I changed it.
LW still didn't work and neither did MW.
I had a look in case I'd shorted something and saw a bit of thin wire laying on the base of L6/7/8. I tried pulling it out but it seemed stuck and I then saw that it was vanishing between the base and aluminium casing.
I took this off, after noting the connections, and found it was actually three strands of thin wire going into the can but connected to nothing. The wires going from the tags to the coils all appear to be in order.
I'm calling it a day for now as I've got back ache and will be able to see better with fresh eyes tomorrow but hopefully this is the fault found.
Thanks for the much appreciated assistance.
- Joe
