08-12-2013, 04:20 PM
Today's test results:-
C1 = 544pF
TC1+TC3 = 97pF
I haven't separated all these to test as they are sods to desolder and snipping leaves the wires too short to reconnect - I'm even starting to think of PCBs favourably.
TC5+TC6+C4 = 262pF
L3 = 2Ω/0.02mH
L2 = 13.2Ω/1.38mH
'Scope trace from Tr1 Emitter on MW using a X10 probe:-
(The line is really thin and sharp)
On LW it's just a straight line four divisions down which, if I've done the sums right, is -800mVDC
- Joe
C1 = 544pF
TC1+TC3 = 97pF
I haven't separated all these to test as they are sods to desolder and snipping leaves the wires too short to reconnect - I'm even starting to think of PCBs favourably.
TC5+TC6+C4 = 262pF
L3 = 2Ω/0.02mH
L2 = 13.2Ω/1.38mH
'Scope trace from Tr1 Emitter on MW using a X10 probe:-
(The line is really thin and sharp)
On LW it's just a straight line four divisions down which, if I've done the sums right, is -800mVDC
- Joe
