08-12-2013, 04:14 PM
Hi all
Thanks for your help and guidance. The amp specifies a 3.2ohm speaker in this instance.
I have wired the resistor as per Ed Dinnings instructionas and I beleive that it must be more than 15ohms as I have the slide about an inch in from one side.
Regards
Rob
Thanks for your help and guidance. The amp specifies a 3.2ohm speaker in this instance.
I have wired the resistor as per Ed Dinnings instructionas and I beleive that it must be more than 15ohms as I have the slide about an inch in from one side.
Regards
Rob
if all else fails...read the instructions!
