A scan of the parts of the manual covering the connections and what they do will help us a lot.
I did say a long way back that there aught to be a setting for the control voltage range.
If it can be found then a 10k pot should work.
It looks like the pot may be driven by a constant currant that can be adjusted from the diagram.
A1 and ACM are the pins we need to read about.
I did say a long way back that there aught to be a setting for the control voltage range.
If it can be found then a 10k pot should work.
It looks like the pot may be driven by a constant currant that can be adjusted from the diagram.
A1 and ACM are the pins we need to read about.
