10-10-2013, 01:58 PM
set the control on the gimbal to zero .
use the counter weight to get the arm to balance IE it should be horizontal .
dial in the required stylus weight on the gimbal control usually 2/2.5 grams
set the anti skating control to the same the are two scales one for elliptical and one for spherical.
in practice it makes bot a lot of difference .
as for the 30 degrees incline on auto sounds about right.
Rob T
use the counter weight to get the arm to balance IE it should be horizontal .
dial in the required stylus weight on the gimbal control usually 2/2.5 grams
set the anti skating control to the same the are two scales one for elliptical and one for spherical.
in practice it makes bot a lot of difference .
as for the 30 degrees incline on auto sounds about right.
Rob T
if its made by hand it can be repaired by hand
