02-10-2013, 06:43 PM
Hi All,
Having looked again at the circuits there are very some very subtle differences. It does appear that TR1 and TR2 are they same in both models. In the vibrochamp the valves are 12ax7's and a 6v6gt. In the bronco they are 12ax7a's and a 6v6gta. The circuits are identical.....apparently there is an error with voltage figures in the Bronco schematic (its too high). The only other difference is the 40/20/20 and 20/20/20 smoothing cap otherwise they are the same.
Regards
Rob
Having looked again at the circuits there are very some very subtle differences. It does appear that TR1 and TR2 are they same in both models. In the vibrochamp the valves are 12ax7's and a 6v6gt. In the bronco they are 12ax7a's and a 6v6gta. The circuits are identical.....apparently there is an error with voltage figures in the Bronco schematic (its too high). The only other difference is the 40/20/20 and 20/20/20 smoothing cap otherwise they are the same.
Regards
Rob
if all else fails...read the instructions!
