(26-09-2013, 06:03 PM)Yorkie Wrote: Very interesting Nick - not so expensive for the 125 mL kit, or even the 500mL kit come to that, given that you only add 2 - 3 teaspoons (10 - 15 mL) to a Litre of hot water, so it goes a long way. Do you use all three stages - presumably you don't bother with the second stage (lacquer remover)?
I only use the cleaner ("Surface cleaning concentrate") - the first and second stage I do by 5 minutes in the ultrasonic tank using Tikopur R33 at 5% and 50C.
If you don't have a tank, then I guess the first two are needed.
Be careful when burning Cupressus - its highly resinous, even when dry, and burns giving off a lot of tar which doesn't help the chimney (risk of eventual chimney fire - resin is very difficult for the sweep to remove) or your wood-burner etc. It also "spits" whilst burning, sending out dangerous sparks so really shouldn't be used in an unattended open fire, or, according to some, used in an open fire at all...
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu
