13-09-2013, 04:59 PM
(13-09-2013, 03:44 PM)Refugee Wrote: It looks like it would work well with a bit of coax with a couple of turns of inner around the anode lead and the outer connected to the earth on the radio and the inner as normal.
I'm sure it would work quite well like that, provided the coax isn't too long. Put simply the Z is not matched and the C of the coax would attenuate the signal and could load the Anode cct.
(Pls don't jump on me for this simplification)
The other one I made was for 50 Ohm loads so that would be ideal. A matching circuit could also be made for this one .
