27-05-2013, 11:44 PM
The contacts of the original switch could well have welded themselves shut so if you can take it to bits you'll probably be able to free them.
As for the lack of sensitivity, the first thing is to replace the old caps and make sure that the HT is reasonable.
The other obvious thing is: has it got an internal aerial and if so is it connected properly and not damaged?
Good luck with it.
- Joe
As for the lack of sensitivity, the first thing is to replace the old caps and make sure that the HT is reasonable.
The other obvious thing is: has it got an internal aerial and if so is it connected properly and not damaged?
Good luck with it.
- Joe
