31-03-2013, 06:06 PM
A bit to compex for me Nick but hat's off to your effort, it looks 1st rate I have to say.
The one shown in the video I posted is more suited to my talents, I am sure that could be scaled down to half inch formers or maybe less, might have a go one day for my Regenerodyne coil sets, not a lot of turns so I could manually turn the assembly via a simple mechanical drive so I wouldn't need a motor, all I need then is a simple wave winder for LW coils...Any Ideas, must be simple, homebrew, not particularly fast (that seems to be a common down fall) but reliable, c'mon you head scratchers.
Lawrence.
The one shown in the video I posted is more suited to my talents, I am sure that could be scaled down to half inch formers or maybe less, might have a go one day for my Regenerodyne coil sets, not a lot of turns so I could manually turn the assembly via a simple mechanical drive so I wouldn't need a motor, all I need then is a simple wave winder for LW coils...Any Ideas, must be simple, homebrew, not particularly fast (that seems to be a common down fall) but reliable, c'mon you head scratchers.
Lawrence.
