26-03-2013, 10:21 PM
I have a Blackstar Jupiter 500 with a maximum frequency of about 500kHz. It has a sweep function but you need to feed a suitable signal into the sweep input. I've never used it for alignment but you have to careful as the sinewave output is not a pure output as it's a shaped triangle wave.
You may also find that the output level adjustment may be too coarse.
However if you've got a function generator which can be swept over the required range, try it.
Keith
You may also find that the output level adjustment may be too coarse.
However if you've got a function generator which can be swept over the required range, try it.
Keith
