12-02-2013, 05:42 PM
Hi Col,
At the moment I don't need a flywheel etc., but I would like to know how to machine one from a solid block with only a lathe. The same goes for finishing the castings for model locomotive wheels. I attach some photos of finished flywheels and Loco wheels plus some wheel castings. The diameters could be between 2.5 and 6 inches.
BRs
Mike
At the moment I don't need a flywheel etc., but I would like to know how to machine one from a solid block with only a lathe. The same goes for finishing the castings for model locomotive wheels. I attach some photos of finished flywheels and Loco wheels plus some wheel castings. The diameters could be between 2.5 and 6 inches.
BRs
Mike
