09-02-2013, 09:14 AM
(08-02-2013, 05:26 PM)pwdrive Wrote: Hi Andy, am no expert so maybe try on a sample piece and see what the finished dimension turns out like compared the samples projected dimension, I have only done Ali.....clamped between HD steel angle in a vice and hammerd over with a long block of wood!
Good luck
Lawrence.
When I fold sheet metal I always drill a VERY small hole in all 4 corners before bending when forming a tray shape or open top box. To get it right every time needs practice also make a pattern using old news paper.Ted
