15-01-2013, 11:02 AM
Good Oh! Kevin. I too have restuffed similar can capacitors on the 11 valve chassis but those only have two 8 mF in them. Created a new label for one, in Corel Draw, as it was badly damaged. Be easy to mod it to yours if you need one.
Good idea to clean all the valve bases, I have used a little switch cleaner on them in the past. For switches I thoughly recommend the De Oxit sold by the BVWS (no connection). Expensive but it seems to keep on doing its stuff where as others are good at first but the switch is noisy again after 6 months. I'm cautious and dont spray much just a dribble as I have read reports of the old Paxolin not liking it. So far no problems.
Gary
Good idea to clean all the valve bases, I have used a little switch cleaner on them in the past. For switches I thoughly recommend the De Oxit sold by the BVWS (no connection). Expensive but it seems to keep on doing its stuff where as others are good at first but the switch is noisy again after 6 months. I'm cautious and dont spray much just a dribble as I have read reports of the old Paxolin not liking it. So far no problems.
Gary
