08-01-2013, 09:34 PM
I'd second that! It was written before I became a member of BVWS so I'd not seen the two bulletins in which the two articles appeared. Excellent Gary - I'll be off on a frolic now itching to make a winder along similar lines - at least, I'll add it to my 'do list'!! I had thought about using a battery powered screwdriver, but they do have the slight drawback of being single speed rather than the variable elctronic speed of a battery powered drill, so I might canibalise a drill instead.
I'l have to check the gauge of the wire on the AC77 field coil - the thicker the better! I may have thicker than 46 SWG (say 42 SWG) if I poke around among my 'souvenirs'.
Thanks for posting the article Joe.
I'l have to check the gauge of the wire on the AC77 field coil - the thicker the better! I may have thicker than 46 SWG (say 42 SWG) if I poke around among my 'souvenirs'.
Thanks for posting the article Joe.
Regards, David.
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
