05-01-2013, 05:09 PM
RGB from SCART uses the CVBS signal for sync purposes. If the TV isn't set up for RGB you should still get a picture as switching to RGB on the STB will set pin 16 on the connector to +5v telling the TV that RGB has been enabled.
As has been said check the pins aren't bent, it's all too easy to bend them or for them to get pushed back into the housing.
Are the connectors on the recorder labelled TV and VCR? Although both output video and audio only the TV connector will output the switching signals.
Keith
As has been said check the pins aren't bent, it's all too easy to bend them or for them to get pushed back into the housing.
Are the connectors on the recorder labelled TV and VCR? Although both output video and audio only the TV connector will output the switching signals.
Keith
