|
Bush TR82C
|
|
Yes, those Tinnerman clips were a pain, the round ones were even worse, we used to bend the rectangular ones inside out with a pair of thin nosed pliers and use packing washers and a circlip to effect a repair. Used a lot in tellies.
Lawrence. http://www.dsm.com/en_US/html/dep/pon_ton_fast.htm |
| Messages In This Thread |
|
Bush TR82C - by Bushbaby - 01-12-2012, 06:19 PM
RE: Bush TR82C - by Joe - 01-12-2012, 06:31 PM
RE: Bush TR82C - by Yorkie - 01-12-2012, 07:50 PM
RE: Bush TR82C - by Bushbaby - 01-12-2012, 08:02 PM
RE: Bush TR82C - by Mark R - 01-12-2012, 08:03 PM
RE: Bush TR82C - by Steve_P - 01-12-2012, 09:08 PM
RE: Bush TR82C - by tiv48 - 01-12-2012, 09:12 PM
RE: Bush TR82C - by Bushbaby - 01-12-2012, 09:28 PM
RE: Bush TR82C - by tiv48 - 01-12-2012, 09:36 PM
RE: Bush TR82C - by Steve_P - 02-12-2012, 02:00 PM
RE: Bush TR82C - by Joe - 02-12-2012, 04:09 PM
RE: Bush TR82C - by Bushbaby - 02-12-2012, 09:52 PM
RE: Bush TR82C - by Yorkie - 03-12-2012, 11:31 AM
RE: Bush TR82C - by Robert Darwent - 03-12-2012, 06:50 PM
RE: Bush TR82C - by pwdrive - 03-12-2012, 12:19 PM
RE: Bush TR82C - by Yorkie - 03-12-2012, 10:02 PM
RE: Bush TR82C - by Bushbaby - 08-12-2012, 06:23 PM
RE: Bush TR82C - by Steve_P - 08-12-2012, 06:35 PM
RE: Bush TR82C - by Bushbaby - 09-12-2012, 10:34 AM
|
| Users browsing this thread: |
| 1 Guest(s) |
