21-11-2012, 09:11 PM
Hi Guys,
Something is not right (I've no bulbs in the circuit at the mo) the reading from the neutral to the chassis (switch on) is 8.3kR?? The reading from the voltage tapper to live pin is about 0.4R.
Thoughts?
Rob
Something is not right (I've no bulbs in the circuit at the mo) the reading from the neutral to the chassis (switch on) is 8.3kR?? The reading from the voltage tapper to live pin is about 0.4R.
Thoughts?
Rob
if all else fails...read the instructions!
