21-11-2012, 01:13 PM
Just had a look in my stockpile, and I found a load of 0.0047uf poly caps rated at 630V, also found some 0.22uf also rated at 630V
so I think I can make a start.
I presume to start by replacing C117, C118 & C122 with the 0.0047uf, then replace the three 0.25uf in the bathtub with 0.22uf.
Is this correct?
so I think I can make a start.
I presume to start by replacing C117, C118 & C122 with the 0.0047uf, then replace the three 0.25uf in the bathtub with 0.22uf.
Is this correct?
