12-11-2012, 04:23 PM
Hi all, Firstly many thanks for all the help, I used Gimp, cleaned up the image with a white air brush, now the new one looks perfect. My biggest problem was getting the printer to print exactly the size I wanted, but managed it in the end. I now have a Osram Music Magnet, made as a kit by GEC in perfect working order and looking the bees knees. I took the cabinet back to basics, gave it a good smoothing and dark antique oak stain and clear lacquer polish.
Both wavebands pull in a few stations after temporarily fitting an O/P transformer and 5 x 3 speaker laying on the bench, although the first valve, the S215 was a bit down on my Sussex valve tester I was very pleased with the results. New S215 on order.
My collection seems to out growing my display area, a friend suggested I approach a large local attraction to see if they would be interested in providing a room to show my gear, but I don't want to loose control, anyone had any experience of doing such a thing?
All the best..
Both wavebands pull in a few stations after temporarily fitting an O/P transformer and 5 x 3 speaker laying on the bench, although the first valve, the S215 was a bit down on my Sussex valve tester I was very pleased with the results. New S215 on order.
My collection seems to out growing my display area, a friend suggested I approach a large local attraction to see if they would be interested in providing a room to show my gear, but I don't want to loose control, anyone had any experience of doing such a thing?
All the best..
