07-10-2012, 08:19 PM
hi alan i think so..the black wire on the primary is now on pin3 .
the first thing i will try is connecting the sets own speaker the one i am useing is a 70 watt 85db hifi speaker.
i am not shore if the rs tx was made for this type of circuit.
but will try the secondry taps
rob t
the first thing i will try is connecting the sets own speaker the one i am useing is a 70 watt 85db hifi speaker.
i am not shore if the rs tx was made for this type of circuit.
but will try the secondry taps
rob t
if its made by hand it can be repaired by hand
