06-10-2012, 02:35 PM
Rob,
Get a bigger iron
Seriously, I assume these are the connections to the fixed vanes and Trimmers. I've never had any problems with a Weller and a decent sized bit. You can usually suck most of the solder off then wiggle the wire out of the hole. On the other hand the connections to the Frame can be a bit problematic, although they are usually braid and don't need changing.
Alan
Get a bigger iron
Seriously, I assume these are the connections to the fixed vanes and Trimmers. I've never had any problems with a Weller and a decent sized bit. You can usually suck most of the solder off then wiggle the wire out of the hole. On the other hand the connections to the Frame can be a bit problematic, although they are usually braid and don't need changing.
Alan
