24-08-2012, 06:54 PM
(This post was last modified: 24-08-2012, 06:56 PM by Robert Darwent.)
And here is the red repro BP10 dial fitted into the set;
The two red dots (one either end of the clear tuning window) are a little fainter on the inkjet film than the rest of the red legend which is on photo paper, but I don't think it's too noticeable.
This was one of my very first attempts at making reproduction dials about 5 or so years ago now. Even so, I was more than happy with how it turned out and the overall appearance of the set. Something of an improvement on the flaky, half-erased original in any case.
Regards
The two red dots (one either end of the clear tuning window) are a little fainter on the inkjet film than the rest of the red legend which is on photo paper, but I don't think it's too noticeable.
This was one of my very first attempts at making reproduction dials about 5 or so years ago now. Even so, I was more than happy with how it turned out and the overall appearance of the set. Something of an improvement on the flaky, half-erased original in any case.
Regards
