07-08-2012, 06:57 PM
(07-08-2012, 06:44 PM)Geaney Wrote: I started to think I'd made an error in component replacements or connected something up incorrectly but if I did so far I can't find it.
Hi John,
Suggest you measure the total HT (B+) current and the total LT (through the heaters/dial bulbs). The heaters should be taking around 0.3A and if the service sheet is accurate the HT around 0.13A.
If you've made an error somewhere it will most likely show up with the HT current value. Measure with the volume at minimum and near maximum.
Regards
