03-08-2012, 04:49 PM
after serching i managed to find a 6c9 in a box of unsorted tv valves however this was not the end of my problems
the results were the same as the ech42 except the stations were in a different place.
as there was unexceptable hum i thought i would work on that first it was not there with only the ez41 and el41 fitted as i could not see fitting the missing valve causing it ,the only other thing i had done was to clean up some of the sticky mess under the chassis.
with the aid of a bright torch i found one end of c20 had come off.as i said it is hidden under c24 so iunsoldered c24 and replaced c20 with 4.7nf with longer legs .this should cure the hum.
i was amazed when powering it up to find the set now works fine.
as an experiment i swapped the 6c9 for a ech42 and it still works only difference is staitions not in the right place.
so as far as a pye p75a is cocerned either will do .
there is 1 hunts cap in the set but it checks out ok.
i am now left with the cabinet witch can join the feranti in anothe to do pile
more photos to follow
rob t
the results were the same as the ech42 except the stations were in a different place.
as there was unexceptable hum i thought i would work on that first it was not there with only the ez41 and el41 fitted as i could not see fitting the missing valve causing it ,the only other thing i had done was to clean up some of the sticky mess under the chassis.
with the aid of a bright torch i found one end of c20 had come off.as i said it is hidden under c24 so iunsoldered c24 and replaced c20 with 4.7nf with longer legs .this should cure the hum.
i was amazed when powering it up to find the set now works fine.
as an experiment i swapped the 6c9 for a ech42 and it still works only difference is staitions not in the right place.
so as far as a pye p75a is cocerned either will do .
there is 1 hunts cap in the set but it checks out ok.
i am now left with the cabinet witch can join the feranti in anothe to do pile
more photos to follow
rob t
if its made by hand it can be repaired by hand







