03-08-2012, 03:45 PM
First cock up on this one going by the circuit i have i fitted the other valves ech42/ef41 the result was faint stations on mw only.
after spending far to long checking here and there i realised there was some thing wrong around valve 1.any of you who have worked on a p75a will know what the problem is.
yes valve 1 should be a 6c9 not a ech42 .
the trader sheet refers to model p75 not the 75a
does any one know of a substitute as i have scoured e bay and the is not one there.
rob t
after spending far to long checking here and there i realised there was some thing wrong around valve 1.any of you who have worked on a p75a will know what the problem is.
yes valve 1 should be a 6c9 not a ech42 .
the trader sheet refers to model p75 not the 75a
does any one know of a substitute as i have scoured e bay and the is not one there.
rob t
if its made by hand it can be repaired by hand
