02-08-2012, 04:21 PM
Not that bad. Have you got the valves from other sets that you could try. The valves are wired in Parallel on this by the way, so if one's heater goes O/C the rest stay up.
If you get an EZ40 and plug that in, you can check the LT and HT. Also if there is HT on the Anode pin of the EL41 (Pin 2) then this bodes well for the Output Transformer.
Good sets these. Get it fixed!
Cheers,
Steve P.
If you get an EZ40 and plug that in, you can check the LT and HT. Also if there is HT on the Anode pin of the EL41 (Pin 2) then this bodes well for the Output Transformer.
Good sets these. Get it fixed!
Cheers,
Steve P.
If we've always had that, why is the car boot open? You aren't smuggling in another old TV are you...?
