New Lathe Owner.

New Lathe Owner.

Bushbaby

Senior Engineer in Charge

Posts: 1,383
Reputation: 10
Location: Hockley, Essex

19-07-2012, 08:05 PM

Well done Joe,
It does look remarkably similar to the Myford ML3 & 4. I'm still working on mine!!

Regards

Rob

if all else fails...read the instructions!

Quote

Messages In This Thread

New Lathe Owner. - by Joe - 19-07-2012, 06:55 PM

RE: New Lathe Owner. - by Joe - 19-07-2012, 07:38 PM

RE: New Lathe Owner. - by pwdrive - 19-07-2012, 07:41 PM

RE: New Lathe Owner. - by Bushbaby - 19-07-2012, 08:05 PM

RE: New Lathe Owner. - by Retired - 20-07-2012, 09:40 AM

RE: New Lathe Owner. - by tiv48 - 20-07-2012, 11:00 AM

RE: New Lathe Owner. - by Joe - 20-07-2012, 12:55 PM

RE: New Lathe Owner. - by ed731pdh - 20-07-2012, 04:29 PM

RE: New Lathe Owner. - by Joe - 28-07-2012, 02:51 PM

RE: New Lathe Owner. - by Yorkie - 28-07-2012, 08:09 PM

RE: New Lathe Owner. - by Joe - 28-07-2012, 08:43 PM

RE: New Lathe Owner. - by pwdrive - 28-07-2012, 09:04 PM

RE: New Lathe Owner. - by Joe - 29-07-2012, 12:12 PM

RE: New Lathe Owner. - by Joe - 05-08-2012, 07:33 AM

RE: New Lathe Owner. - by Joe - 05-08-2012, 01:17 PM

RE: New Lathe Owner. - by Joe - 05-08-2012, 01:45 PM

RE: New Lathe Owner. - by pwdrive - 05-08-2012, 03:14 PM

RE: New Lathe Owner. - by Joe - 05-08-2012, 03:32 PM

RE: New Lathe Owner. - by pwdrive - 05-08-2012, 04:00 PM

RE: New Lathe Owner. - by Yorkie - 05-08-2012, 05:17 PM

RE: New Lathe Owner. - by pwdrive - 05-08-2012, 07:09 PM

RE: New Lathe Owner. - by Tedzed1 - 05-08-2012, 07:07 PM

RE: New Lathe Owner. - by pwdrive - 05-08-2012, 07:30 PM

RE: New Lathe Owner. - by Joe - 06-08-2012, 05:59 PM

RE: New Lathe Owner. - by pwdrive - 06-08-2012, 06:11 PM

Users browsing this thread:

1 Guest(s)