17-07-2012, 01:42 PM
Guys, I have a question on capacitor voltage ratings - the paper waxes in this set are mostly rated at 750V but some are rated as high as 2000V. According to the circuit diagram the B+ is 105V. Am I OK to re-cap using the regular 650V rated components? I can't see why the existing ones are rated for such a high voltage.
Because of the small space, there are three layers of components in places so the top two have to be moved out of the way to get at the bottom ones, etc. I really don't want to have to do this twice so I'm hoping I'm OK with the 650V caps.
All advice on this is much appreciated.
Regards, John
Because of the small space, there are three layers of components in places so the top two have to be moved out of the way to get at the bottom ones, etc. I really don't want to have to do this twice so I'm hoping I'm OK with the 650V caps.
All advice on this is much appreciated.
Regards, John
Time flies like an arrow, fruitflies like a banana!
