02-07-2012, 10:13 PM
I found that Ferguson used a very wide range of remote control protocols. The TX9/10s, including Supersound ones, mostly used the SAA5012 chipset. The TX100 with FastText used a completely different protocol to other TX100 sets IIRC (it's been a while). Later sets were different again.
An uncle worked for Ferguson back in the '80s, so I've got a fair bit of randomly sporadic experience and documentation for these things. But the short answer to the OP is "what Paula said". Sorry...
An uncle worked for Ferguson back in the '80s, so I've got a fair bit of randomly sporadic experience and documentation for these things. But the short answer to the OP is "what Paula said". Sorry...
