31-05-2012, 08:48 PM
First, source or obtain a 7pF capacitor.
Now, one coil is separate, this is the one that goes between the anode of the 12BE6 and the HT
The others are linked together, and one of them has a trimmer and a switch. This coil is probably the larger one, as it is shorted out for MW. The other coil starts off with the 7pF capacitor, the other end of which goes to the HT end of the separate coil mentioned above.
The Antenna coil is similar, so copy it.
Meter out the coils and you should be able to find out which is which by the ohms reading.
Cheers,
Steve P.
Now, one coil is separate, this is the one that goes between the anode of the 12BE6 and the HT
The others are linked together, and one of them has a trimmer and a switch. This coil is probably the larger one, as it is shorted out for MW. The other coil starts off with the 7pF capacitor, the other end of which goes to the HT end of the separate coil mentioned above.
The Antenna coil is similar, so copy it.
Meter out the coils and you should be able to find out which is which by the ohms reading.
Cheers,
Steve P.
If we've always had that, why is the car boot open? You aren't smuggling in another old TV are you...?
