Three things here Mark. Been trying to call but it says you are unavailable. Is your phone OK?
Now I know you are completely mad. One of those...
These are a set which does not seem complicated but often is because of the design. If you're getting nowt, check all the pins on the O/P valve and you should then know if there is a fault here and where. There should be HT on pins 7 and 8. If there is only HT on one, then you can work out from which one it is on where the fault is. There should be about 9 volts on Pin 3.
There should be nothing on Pin 2 by the way. If there is, go for C17.
The details on the valve are here...
http://www.r-type.org/exhib/aaa0343.htm
If this is a version 2 of this set as Yorkie suggests, then you'll find it in the R&TVS books.
Sheesh, one of those... and you call Philips stuff!
Cheers,
Steve P.
Now I know you are completely mad. One of those...
These are a set which does not seem complicated but often is because of the design. If you're getting nowt, check all the pins on the O/P valve and you should then know if there is a fault here and where. There should be HT on pins 7 and 8. If there is only HT on one, then you can work out from which one it is on where the fault is. There should be about 9 volts on Pin 3.
There should be nothing on Pin 2 by the way. If there is, go for C17.
The details on the valve are here...
http://www.r-type.org/exhib/aaa0343.htm
If this is a version 2 of this set as Yorkie suggests, then you'll find it in the R&TVS books.
Sheesh, one of those... and you call Philips stuff!
Cheers,
Steve P.
If we've always had that, why is the car boot open? You aren't smuggling in another old TV are you...?
