11-12-2011, 04:47 PM
Hello,
Yes, this is a compact exothermic welding system for field use.
1. Slide open box and remove one unit.
2. Insert subjects to be welded in each end.
3. Close box cover before striking!
4. Carefully ignite red match spot using match striker on side of box.
5. Allow to cool before touching weld.
This is similar to the more complex CAD Weld system.
Kindest regards,
Yes, this is a compact exothermic welding system for field use.
1. Slide open box and remove one unit.
2. Insert subjects to be welded in each end.
3. Close box cover before striking!
4. Carefully ignite red match spot using match striker on side of box.
5. Allow to cool before touching weld.
This is similar to the more complex CAD Weld system.
Kindest regards,
