08-12-2011, 10:51 PM
Well, been a busy little bunny today, after sanding the cabinet down, first with sandpaper, moving down to the final last sand with fine steel wool, gave it a wipe with white spirits to remove any last residue of dust and grease.
next job was to mask off the cabinet, and spray back in the gold banding round both sides, the left it for a while to settle, getting on with rubbing down the brass trims in the meantime.
last job today was to touch in a couple of blemishes with wood dye, and then treat the cabinet to two coats so far of Rustins scratch remover and polish,
I am now going to let this harden off overnight before applying more coats tomorrow, final coating will be french polish.
next job was to mask off the cabinet, and spray back in the gold banding round both sides, the left it for a while to settle, getting on with rubbing down the brass trims in the meantime.
last job today was to touch in a couple of blemishes with wood dye, and then treat the cabinet to two coats so far of Rustins scratch remover and polish,
I am now going to let this harden off overnight before applying more coats tomorrow, final coating will be french polish.
