08-12-2011, 01:32 PM
Well a little more done this morning, the exponential cone speaker is faulty in both sets, in the picture, the left one is dead,
the right one had gone brittle and split, right round the diaphragm at the edge on the darker part, so have PVA glued it, it does not seem to be rubbing, will find out later when it has dried.
Also made a start on the cabinet, just managed to strip it of all it's old varnish before the rain started, then a quick wipe over with white spirit to deactivate the stripper, will start on the preparation and sanding this afternoon when it has dried off.
the right one had gone brittle and split, right round the diaphragm at the edge on the darker part, so have PVA glued it, it does not seem to be rubbing, will find out later when it has dried.
Also made a start on the cabinet, just managed to strip it of all it's old varnish before the rain started, then a quick wipe over with white spirit to deactivate the stripper, will start on the preparation and sanding this afternoon when it has dried off.
