03-12-2011, 11:58 AM
Mike,
you could well be right but I wonder if the cores are under sized to help prevent jamming. As Laurence points out on his CR300 the core is 7.5mm yet a standard M8 bolt screws into the former. This would allow room for the 'rubber' sometimes used as core lock.
I have some research on the internet and found virtually nothing relevant.
Al
you could well be right but I wonder if the cores are under sized to help prevent jamming. As Laurence points out on his CR300 the core is 7.5mm yet a standard M8 bolt screws into the former. This would allow room for the 'rubber' sometimes used as core lock.
I have some research on the internet and found virtually nothing relevant.
Al
