30-11-2011, 06:04 PM
Hello Lawrence,
Usually, I try to shy away from using spirits of any kind. They tend to do more harm than good. I prefer your use of heat with a little twist.
My best bet has been to use a small, variable temperature soldering pencil that is fitted with a custom made tip. The tip is fashioned in such a way as to fit the tuning slug's slot precisely. Now, gradually increase the temperature until the wax or varnish begins to melt. Gently engage the tip into the slug's slot and allow the slug to warm up a bit. Carefully rotate the soldering pencil until the slug is free. Patience is a virtue in this venture. Great care must be taken not to crack the slug.
Kind regards,
Usually, I try to shy away from using spirits of any kind. They tend to do more harm than good. I prefer your use of heat with a little twist.
My best bet has been to use a small, variable temperature soldering pencil that is fitted with a custom made tip. The tip is fashioned in such a way as to fit the tuning slug's slot precisely. Now, gradually increase the temperature until the wax or varnish begins to melt. Gently engage the tip into the slug's slot and allow the slug to warm up a bit. Carefully rotate the soldering pencil until the slug is free. Patience is a virtue in this venture. Great care must be taken not to crack the slug.
Kind regards,
