26-11-2011, 10:09 PM
I've had a thunk and a bit of a measure. In the light of the endfloat I believe that the 0.51" dimension should be 0.5". It's logical like a lot of the others. They're really Imperial Fractions. Also, the hole in the knob is only about 0.47" deep. There will still be some endfloat, but slightly less.
I've also updated the Drawing. There was a duff dimension on the Detent, and I've made the Arrowheads a bit bigger for clarity.
Alan
I've also updated the Drawing. There was a duff dimension on the Detent, and I've made the Arrowheads a bit bigger for clarity.
Alan
