14-11-2011, 08:37 PM
Counter Belt - What size?
It's not a belt that carries much stress, but we do need the size. Halt the diameter of the counter wheel, half the diameter of the other wheel and twice the distance between the two should be near enough for the belt length. Taking this as the circumference of a circle you can get the diameter of the belt by dividing by PI.
(A woolies rubber band used to do back in the day but I didn't tell you that!)
Meter - It's either stuck or not reading. Try swapping with the other one to see if it's the meter or the electronics. It it's the meter, try giving it a shake, this sometimes loosens them.
Any problems with the speed control or are you just venting your spleen?
Cheers,
Steve P.
It's not a belt that carries much stress, but we do need the size. Halt the diameter of the counter wheel, half the diameter of the other wheel and twice the distance between the two should be near enough for the belt length. Taking this as the circumference of a circle you can get the diameter of the belt by dividing by PI.
(A woolies rubber band used to do back in the day but I didn't tell you that!)
Meter - It's either stuck or not reading. Try swapping with the other one to see if it's the meter or the electronics. It it's the meter, try giving it a shake, this sometimes loosens them.
Any problems with the speed control or are you just venting your spleen?
Cheers,
Steve P.
If we've always had that, why is the car boot open? You aren't smuggling in another old TV are you...?
